ClearRawBytes用于將rawbytes變量的所有內容設置為0。
基本示例
該指令的基本示例如下所示。
示例1
VAR rawbytes raw_數據；
VAR num整數：=8
VAR num float：=13.4；
PackRawBytes integer，raw\u data，1\IntX:=力；
PackRawBytes float，raw\u data，（RawBytesLen（raw\u data）+1）\Float4；
ClearRawBytes raw\u data\FromIndex:=5；
在前4個字節中放置整數的值（從索引1開始），在接下來的4個字節中放置整數的值
從索引5開始計算浮點值。
示例中的后一條指令從索引5開始清除原始_數據的內容，即。
浮點將被清除，但整數保留在raw_數據中。中有效字節的當前長度
Usage
ClearRawBytes is used to set all the contents of a rawbytes variable to 0.
Basic examples
A basic example of the instruction is illustrated below.
Example 1
VAR rawbytes raw_data;
VAR num integer := 8
VAR num float := 13.4;
PackRawBytes integer, raw_data, 1 \IntX := DINT;
PackRawBytes float, raw_data, (RawBytesLen(raw_data)+1) \Float4;
ClearRawBytes raw_data \FromIndex := 5;
In the first 4 bytes the value of integer is placed (from index 1) and in the next 4 bytes
starting from index 5 the value of float.
The last instruction in the example clears the contents of raw_data, starting at index 5, i.e.
float will be cleared, but integer is kept in raw_data. Current length of valid bytes in
客服1